Bevel Gear Generators

TOOL SETTING GAGE SETS Available for Model 12, 12B, 14, 16, 24, 24A, 116 & 118 generators. (123)

TOOL HOLDERS for straight bevel generators available for Gleason Models 12, 12B, 14, 24, 24A generators. Available are standard, extended, Tanruf, Tanruf 'V', Corrugated, Finish & #14 style. Send request for pricing, indicating machine model and serial number and style of toolholder(s) required.

CUTTER BODIES available in all sizes for all hypoid generators, HARDAC, RIDG-AC, WEDG-AC, ROUGHAC, HELIXFORM, Single Cycle, RSR & soft bodies, and straight bevel cutter bodies including REVEX, REVACYCLE and CONIFLEX

GLEASON 14 Straight Bevel 'Coniflex' Gear Generator, 24" dia., 3 D.P., 3.5" max. face, rough & finish cams, stock divider, (11364)

GLEASON 26 Hypoid Gear Generator, 33" dia., 1.5 D.P., 4" max. face, rough & finish track cam, modified roll, hydraulic clamping cylinder, 1974 (12055)

GLEASON 26 Hypoid Gear Generator, 33" dia., 1.5 D.P., 4" max. face, rough & finish track cam, modified roll, hydraulic clamping cylinder, Rebuilt approx. 1990 (12057)

GLEASON 26 Hypoid Gear Rougher, 33" dia., 1.5 D.P., 4" max. face, modified roll, hydraulic clamping cylinder, 1974 (12054)

GLEASON 26 Hypoid Gear Rougher, 33" dia., 1.5 D.P., 4" max. face, modified roll, hydraulic clamping cylinder, 1970 (12056)

GLEASON 26 Hypoid Gear Manufacturing Set , 33" dia., 1.5 D.P., 4" max. face, modified roll, hydraulic clamping cylinders, including one Hypoid Gear Rougher and one Hypoid Gear Finisher, 1974 (12102)

GLEASON 26 Hypoid Gear Manufacturing Set , 33" dia., 1.5 D.P., 4" max. face, modified roll, hydraulic clamping cylinders, including one Hypoid Gear Rougher and one Hypoid Gear Finisher, 1970 (12103)

GLEASON 28 Hypoid Gear Manufacturing Machine , 33" dia., 1.5 D.P., 4" max. face, modified roll, hydraulic clamping cylinders, rough & finish cam, 1973 (12058)

GLEASON 40 Spiral Bevel/Hypoid Gear Planing Generator , 48" diameter, 1 DP, offset +8"/-5", cone distances from 2.875" to 24", pitch angles from 5 to 84 degrees at 90 degree shaft angles, (10056)

CHANGE GEAR SETS and individual gears for Gleason 26 & Gleason 28 Hypoid Generators available. Send machine model and serial number & request pricing for complete set or send list of individual gears required. (124)

GLEASON 102 Hypoid Bevel Gear Generator, 4-5/8" dia., up to 16 D.P., 1966 (11020)

GLEASON 104 (134) Straight Bevel 'Coniflex' Gear Generator, 8-1/2" dia., 3 D.P., 1-3/8" maximum face, power clamping cylinder, 1969 (11210)

GLEASON 104 (134) Straight Bevel 'Coniflex' Gear Generator. This machine is capable of generating Straight Bevel 'Coniflex' gears (same as Model 104), and also steering sectors, racks, and spur and helical gears. Coniflex gear capacity 8-1/2" dia., 3 D.P., 1-3/8" maximum face, power clamping cylinder, 1969 (11639)

GLEASON 106 Hypoid Gear Generator , 8.5" pitch diameter, up to 4DP, 0.500" full depth, 5 to 97 teeth, 1.250" face, hydraulic power work clamping cylinder, Helical Motion, completing cam, 1983. See Gleason 642 for same & additional capacity. (10425/8)

GLEASON 114 Straight Bevel 'Coniflex' Gear Generator, 16" dia., 2.5 D.P., 2-1/2" maximum face, double acting hydraulic clamping mechanism, 1968 (12059)

GLEASON 116 Hypoid Gear Production Set , 18" diameter, 1 rougher & 2 finishers, Overhauled & Reconditioned by Cadillac. Ask for our tolerance limits 1963. (9593)

GLEASON 116 Hypoid Gear Production Set , 18" diameter, 1 rougher & 2 finishers, built 1963. (10204)

GLEASON 116 Hypoid Gear Rougher , 18" diameter, 9" cone, hydraulic work clamping cylinder, metric dials, 1966. (7565)

GLEASON 116 Hypoid Gear Rougher , 18" diameter, 9" cone distance, cam #43300840, hydraulic work clamping cylinder, 1968. (7531)

GLEASON 116 Hypoid Gear Finisher , 18" diameter, 9" cone distance, hydraulic work clamping cylinder. This machine came from a military aircraft gearbox manufacturer, and is in excellent condition. 1963 (10053)

GLEASON 118 Hypoid Gear Generator , 18" dia., 9" cone, Format cycle, hydraulic work clamping, inch dials, 1961. (See Gleason 121 for a machine with this capacity and more) (7656)

GLEASON 121 Hypoid Gear Generator - for Prototype Gear Development or standard gear generation , 18" dia., 2 DP, from 1 to 175 teeth, Helical Motion, tilt spindle, Format, Single Cycle, Cyclex, Helixform, standard range plus extended range allowing cutting of high ratio pinions with as few as one tooth, hydraulic work clamping, cutter speeds from 44 to 307 RPM, 1963 (10330)

GLEASON 134 (104) Straight Bevel 'Coniflex' Gear Generator, 8-1/2" dia., 3 D.P., 1-3/8" maximum face, power clamping cylinder, 1969 (11210)

CHANGE GEAR SETS and individual gears for Gleason 114, Gleason 116, Gleason 118 and Gleason 641 Generators available. Send machine model and serial number & request pricing for complete set or send list of individual gears required. (125)

GLEASON 606 Hypoid Gear Rougher , 10.5" diameter, 2.5 DP, Formate cycle, auto transfer equipment, 1962. (9625)

GLEASON 606 Hypoid Gear Rougher , 10.5" diameter, 2.5 DP, Formate cycle, 1966. (9588)

GLEASON 607 Hypoid Gear Finisher , 10.5" diameter, 2.5 DP, Formate cycle, 1964, Rebuilt 1988. (7998)

GLEASON 606/607 Hypoid Gear Production Set , 10.5" diameter, 2.5 DP, Formate cycle, automatic loading and transfer equipment, 1 rougher & 1 finisher, 1969. (7324/5)

GLEASON 606/607 Hypoid Gear Production Set , 10.5" diameter, 2.5 DP, Formate cycle, manual loading, 1 rougher & 1 finisher, built, 1962 (10331)

GLEASON 608/609 Hypoid Gear Manufacturing Set , 20" diameter, 3" face, 1.0" whole depth, Formate cycle, stock divider, hydraulic clamping cylinders, screw type chip conveyors, 1974 (12100)

GLEASON 608 Hypoid Gear Rougher , 20" diameter, 3" face, 1.25" whole depth, Formate cycle, hydraulic clamping cylinder, 1974 (12060)

GLEASON 609 Hypoid Gear Finisher , 20" diameter, 3" face, 1.0" whole depth, Formate cycle, stock divider, hydraulic clamping cylinder, screw type chip conveyor, 1974 (12061)

GLEASON 609 Hypoid Gear Finisher , 20" diameter, 3" face, 1.0" whole depth, Formate cycle, stock divider, hydraulic clamping cylinder, 1966 (8652)

GLEASON 610 Hypoid Gear Generator , 20" diameter, 3" face, 1.0" whole depth, Formate cycle, hydraulic clamping cylinder, 1973 (12062)

GLEASON 615 Hypoid Pinion Gear Rougher , 7" diameter, 1.75" face, 0.75" whole depth, plunge cut car and light truck pinions, 3.5 seconds/tooth, 1974 (7562)

GLEASON 616 Hypoid Pinion Gear Finisher , 7" diameter, 1.75" face, 0.75" whole depth, plunge cut car and light truck pinions, 1974 (7563)

INDEX PLATES, GENEVAS, LIFT & DROP CAMS for Gleason 606, 607, 608, 609 & 610 hypoid gear generators available. Send request for pricing indicating machine model & serial number, with list of individual index numbers and quantities of each required. (126)

GLEASON 642 G-PLETE Hypoid Gear Generator , 13" diameter, 10:1 extreme ratio, cutter tilt up to 40 degrees, 3.4 DP, Formate, ratio control, helical Motion. This model will do everything the Gleason 106 will do, plus - has additional capability and capacity for maximum production flexibility. 1983 (10426)

GLEASON 642 G-PLETE Hypoid Gear Generator , 13" diameter, 10:1 extreme ratio, cutter tilt up to 40 degrees, 3.4 DP, Formate, cradle rotational setover, helical Motion. This model will do everything the Gleason 106 will do, plus - has additional capability and capacity for maximum production flexibility. 1982 (10427)

GLEASON 645 Hypoid Gear Generator , 28.24" diameter, 4.6" face, 1.25" full depth, 1.5 DP, chip conveyor, power clamping, high speed cutterspindle, 1977 (10768)

GLEASON 645 Hypoid Gear Generator , 28.24" diameter, 4.6" face, 1.25" full depth, 1.5 DP, Helical Motion, Modified Roll, Formate, Straddle Cutting, 1974 (10294)

GLEASON 650 Hypoid Generator , 34" diameter, 1.08 DP (23.5 module), 1.75" full depth, 5" face, Modified Roll, work spindle rotation set-over, sliding base set-in, 1974. (3997)

GLEASON 650 Hypoid Generator , 34" diameter, 1.08 DP (23.5 module), 1.75" full depth, 5" face, Modified Roll, work spindle rotation set-over, sliding base set-in, 1974. (3996)

GLEASON 725 Straight Bevel "Revacycle" Generator with two completing spindles to produce two parts simultaneously up to 4" diameter gear/pinion, 0.420" depth, 1" face, hydraulic power work chucking, 1973 (10591)

GLEASON 725 Straight Bevel "Revacycle" Generator with two completing spindles to produce two parts simultaneously up to 4" diameter gear/pinion, 0.420" depth, 1" face, hydraulic power work chucking, 1973 (10757)

GLEASON 950 Hypoid Pinion Production Center, maximum diameter of pinion 177.8 mm (7"), maximum pitch diameter of mate 266.7 mm (10.5"), maximum face width 44.5 mm (1.75"). Included equipment No. 615 semi-roughs blank with cradle set-over and completes the roughing process, No. 525 chamfers the roughed-out pinion, No. 616 finishes both flanks. The pinions are fed down a magazine in a fully automated loading and transfer system, 1974 See Video (5 MB) See Video (18 MB) (7564)

LAMBERT 109 Automatic Gear Hobber , for cutting slanted profile teeth on crown wheels or for crown & bevel gears used in the watchmaking, dental equipment and the micro and fine precision industry. Can cut standard involute, cycloidal and saw shape profiles using fly cutters or hobs. Maximum workpiece diameter 0.236" (6mm), minimum 0.039" (1mm), 1000 to 3000 RPM, 2 to 24 teeth, automatic loading equipment, 1976. See photos of machine and last part cut. (10444)

CUTTER BODIES available in all sizes for all hypoid generators, HARDAC, RIDG-AC, WEDG-AC, ROUGHAC, HELIXFORM, Single Cycle, RSR & soft bodies, and straight bevel cutter bodies including REVEX, REVACYCLE and CONIFLEX

WERA Model RM-120 CNC Profilator , Siemens CNC, 'M' head, currently equipped to cut end forms, face clutches, capacity 3.15" diameter, 11.8" between centers, full sound enclosure, built 1995 (10378)

CADILLAC MACHINERY CO., INC.
1401 Lunt Avenue Elk Grove, IL 60007 USA (847) 437-6600 FAX (847) 437-6618 sales@cadillacmachinery.com